Nickel alloys Manual electrode ENiCrMo-13 weld fabrication data
KOMPONO KIMIKA:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | Fe | P | S |
GB/T RULA | 0.02 | 1.00 | 0.20 | 22.0-24.0 | ≥56 | 15.0-16.5 | 1.50 | 0.02 | 0.015 |
NA RULA AWS | 0.02 | 1.00 | 0.20 | 22.0-24.0 | ʻāpana | 15.0-16.5 | 1.50 | 0.02 | 0.01 |
KA WAIWAI LA'ANA | 0.018 | 0.5 | 0.15 | 22.5 | 60.31 | 15.5 | 1 | 0.005 | 0.004 |
WAIWAI MECHANICAL:
WAIWAI | IKAIKA HUA(MPa) | KA IKAIKA HOU (MPa) | KA WAIWAI IMAPACT J/℃ | ELONGATION(%) | ||||
GB/T RULA | 350 | 690 | - | 22 | ||||
NA RULA AWS | - | 690 | - | 25 | ||||
KA WAIWAI LA'ANA | 520 | 750 | - | 32 |
PALAPALA PALAPALA I MANAOIA:
NĀ KĀNĀWAI (mm) | 2.6*300 | 3.2*350 | 4.0*350 | |||||||
UILA (Amp) | H/W | 65-95 | 70-115 | 95-145 | ||||||
O/W | 55-80 | 60-110 | 90-35 |
Haʻahaʻa hydrogen ʻano lima electrode, nominal haku mele (kaumaha pakeneka) mea 59Ni-23Cr-16Mo-1Fe, nickel-chromium-molybdenum alloy electrode.
Paʻa paʻa, nani ka hana ʻana, liʻiliʻi liʻiliʻi, maʻalahi ka wehe ʻana i ka slag.
ʻO ke kūpaʻa porosity maikaʻi, paʻa nā waiwai mechanical o ka metala hoʻoheheʻe.
-
308,000 tons moku aila ʻaila VLCC
-
ʻO JU2000E pahu hoʻoheheʻe pahu
-
Zhejiang Satellite Energy 3× 60,000 m³LPG pahu waihona
KOMPONO KIMIKA:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | Fe | P | S |
GB/T RULA | 0.02 | 1.00 | 0.20 | 22.0-24.0 | ≥56 | 15.0-16.5 | 1.50 | 0.02 | 0.015 |
NA RULA AWS | 0.02 | 1.00 | 0.20 | 22.0-24.0 | ʻāpana | 15.0-16.5 | 1.50 | 0.02 | 0.01 |
KA WAIWAI LA'ANA | 0.018 | 0.5 | 0.15 | 22.5 | 60.31 | 15.5 | 1 | 0.005 | 0.004 |
WAIWAI MECHANICAL:
WAIWAI | IKAIKA HUA(MPa) | KA IKAIKA HOU (MPa) | KA WAIWAI IMAPACT J/℃ | ELONGATION(%) | ||||
GB/T RULA | 350 | 690 | - | 22 | ||||
NA RULA AWS | - | 690 | - | 25 | ||||
KA WAIWAI LA'ANA | 520 | 750 | - | 32 |
PALAPALA PALAPALA I MANAOIA:
NĀ KĀNĀWAI (mm) | 2.6*300 | 3.2*350 | 4.0*350 | |||||||
UILA (Amp) | H/W | 65-95 | 70-115 | 95-145 | ||||||
O/W | 55-80 | 60-110 | 90-35 |
E kākau i kāu leka ma aneʻi a hoʻouna mai iā mākou